Can you listen to Amateur Radio VHF/UHF bands on WebSDR?

Can you listen to Amateur Radio VHF/UHF bands on WebSDR?

So far the WebSDRs which I had listened to were either of HF bands or Qatar Oscar 100 10 GHz band. VHF/UHF bands come in between. My search led me to the WebSDR or Software Defined Radio receiver connected to the internet page by PA3FWM from the Netherlands.

Here is the URL to the page listing a whole lot of WebSDRs using the software by PA3FWM: http://websdr.org/. The page has a band filter and if you choose 2m, you get VHF WebSDRs and if you choose UHF you get all the higher bands, including the 10 GHz channels for QO 100.

All of these WebSDRs have radio buttons to select the Amateur Band you wish to listen. Most them also have HF in addition to 2m and 70cm. Waterfall display is there as in case of QO 100 and other HF WebSDRs from my region which are mostly KiwiWebSDRs. Tuning control is also similar, in that you can drag using a mouse pointer and tune. But unfortunately I was not able to listen to any stations on VHF or UHF. May be because of the difference in time zones as the WebSDRs which I checked were not from my region and activity could be occurring at other times.