{"id":16853,"date":"2026-04-08T12:57:03","date_gmt":"2026-04-08T07:27:03","guid":{"rendered":"https:\/\/johnsonfrancis.org\/techworld\/?p=16853"},"modified":"2026-04-08T12:57:48","modified_gmt":"2026-04-08T07:27:48","slug":"smd-soldering-for-lmr-sdr-1-1","status":"publish","type":"post","link":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/","title":{"rendered":"SMD Soldering for LMR SDR 1.1"},"content":{"rendered":"<p><iframe loading=\"lazy\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dAYeW5ppjQs?si=rGMpBH30eWYImp1g\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe><\/p>\n\n\n<p class=\"wp-block-paragraph\">Though I had bought the LMR SDR 1.1 board from VU3ZOF with Si5351 clock generator pre soldered as it was a tiny SMD component, later I found that two voltage regulator ICs in the kit prepared by VU3GEX are also SMD. An advantage was that they had slightly bigger leads than Si5351. So I thought of soldering them myself. That was the first ever time I tried soldering SMD components!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>How to solder smd components<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Soldering Surface Mount Devices (SMD) can feel like performing surgery on a grain of rice, but with the right technique, it\u2019s often faster than through-hole soldering. Mastering this is a game-changer for modern PCB designs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Here is a guide to the most common manual method: <strong>The Bead-and-Bridge (or Tack-and-Flow) Technique.<\/strong><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">1. Essential Tools<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before you start, ensure you have the right gear. Standard through-hole tools are often too blunt for SMD work.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Fine-tip Soldering Iron:<\/strong> A &#8220;chisel&#8221; or &#8220;conical&#8221; tip works best. Set it to roughly <strong>330\u00b0C to 350\u00b0C<\/strong>.<\/li>\n\n\n\n<li><strong>Thin Solder:<\/strong> Use 0.3mm or 0.5mm diameter solder.<\/li>\n\n\n\n<li><strong>Flux Pen or Gel:<\/strong> This is the &#8220;secret sauce.&#8221; It helps heat transfer and prevents bridges.<\/li>\n\n\n\n<li><strong>Tweezers:<\/strong> ESD-safe, fine-pointed tweezers are mandatory for positioning.<\/li>\n\n\n\n<li><strong>Magnification:<\/strong> A magnifying lamp or jeweler&#8217;s loupe.<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">2. Step-by-Step Manual Soldering<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Step A: Tin One Pad<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Do not try to solder both sides at once. Apply a tiny amount of solder to <strong>only one<\/strong> of the PCB pads. This creates a small &#8220;bead.&#8221;<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step B: The Tack<\/h3>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li>Pick up the component with your tweezers.<\/li>\n\n\n\n<li>Re-heat the solder bead on the pad with your iron.<\/li>\n\n\n\n<li>Slide the component into the molten solder until it is centered and flat against the board.<\/li>\n\n\n\n<li>Remove the iron, but <strong>keep holding the component<\/strong> with tweezers until the solder solidifies (about 2 seconds).<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\">Step C: The Second Pad<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Now that the component is mechanically &#8220;tacked&#8221; in place:<\/p>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li>Apply a small amount of flux to the un-soldered pad.<\/li>\n\n\n\n<li>Touch the iron tip to the junction of the component lead and the pad.<\/li>\n\n\n\n<li>Feed a tiny bit of solder. It should flow smoothly across the joint.<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\">Step D: Refresh the First Joint (Optional)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Sometimes the first joint (the &#8220;tack&#8221;) looks a bit dull or &#8220;dry.&#8221; Apply a drop of flux and briefly touch it with the iron to make it shiny and smooth.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">3. Dealing with Integrated Circuits (ICs)<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For chips with many small legs (like SOIC or QFP packages), use the <strong>Drag Soldering<\/strong> method:<\/p>\n\n\n\n<ol start=\"1\" class=\"wp-block-list\">\n<li><strong>Anchor:<\/strong> Solder one corner pin to align the chip. Solder the opposite corner pin to lock it.<\/li>\n\n\n\n<li><strong>Flux:<\/strong> Apply plenty of flux across all the pins on one side.<\/li>\n\n\n\n<li><strong>The Drag:<\/strong> Put a small &#8220;bead&#8221; of solder on your iron tip. Drag the tip slowly across the tops of the pins. The flux will magically pull the solder onto the pads and off the spaces between them.<\/li>\n<\/ol>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\">4. Pro-Tips for Success<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Cleanliness:<\/strong> If the pads are old, clean them with Isopropyl Alcohol (IPA) first.<\/li>\n\n\n\n<li><strong>Don&#8217;t Overheat:<\/strong> SMD components are small and can&#8217;t dissipate heat well. If the solder doesn&#8217;t flow in 3 seconds, pull away and let it cool.<\/li>\n\n\n\n<li><strong>Fixing Bridges:<\/strong> If you accidentally join two pins, don&#8217;t panic. Add more flux and use <strong>Solder Wick (Braid)<\/strong> to soak up the excess.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">5. Summary Table: Solder Joint Appearance<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><td><strong>Feature<\/strong><\/td><td><strong>Good Joint<\/strong><\/td><td><strong>Bad Joint (Cold\/Weak)<\/strong><\/td><\/tr><\/thead><tbody><tr><td><strong>Finish<\/strong><\/td><td>Shiny and smooth<\/td><td>Dull, grainy, or &#8220;cracked&#8221;<\/td><\/tr><tr><td><strong>Shape<\/strong><\/td><td>Concave &#8220;fillet&#8221; (like a ramp)<\/td><td>Ball-shaped or &#8220;blobby&#8221;<\/td><\/tr><tr><td><strong>Coverage<\/strong><\/td><td>Covers the pad and the lead<\/td><td>Solder sits only on the lead<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Though I had bought the LMR SDR 1.1 board from VU3ZOF with Si5351 clock generator pre soldered as it was a tiny SMD component, later I found that two voltage regulator ICs in the kit prepared by VU3GEX are also SMD. An advantage was that they had slightly bigger leads than Si5351. So I thought [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":16859,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7],"tags":[],"class_list":["post-16853","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-amateur-radio-ham-radio"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld\" \/>\n<meta property=\"og:description\" content=\"Though I had bought the LMR SDR 1.1 board from VU3ZOF with Si5351 clock generator pre soldered as it was a tiny SMD component, later I found that two voltage regulator ICs in the kit prepared by VU3GEX are also SMD. An advantage was that they had slightly bigger leads than Si5351. So I thought [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/\" \/>\n<meta property=\"og:site_name\" content=\"Johnson&#039;s Techworld\" \/>\n<meta property=\"article:published_time\" content=\"2026-04-08T07:27:03+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-04-08T07:27:48+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"676\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Johnson Francis\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Johnson Francis\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/\"},\"author\":{\"name\":\"Johnson Francis\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#\\\/schema\\\/person\\\/6201c843e80ccd3578e6196b1d007027\"},\"headline\":\"SMD Soldering for LMR SDR 1.1\",\"datePublished\":\"2026-04-08T07:27:03+00:00\",\"dateModified\":\"2026-04-08T07:27:48+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/\"},\"wordCount\":583,\"publisher\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#\\\/schema\\\/person\\\/6201c843e80ccd3578e6196b1d007027\"},\"image\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/SMD-Soldering-for-LMR-SDR-1.1.jpg\",\"articleSection\":[\"Amateur Radio (Ham Radio)\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/\",\"url\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/\",\"name\":\"SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/SMD-Soldering-for-LMR-SDR-1.1.jpg\",\"datePublished\":\"2026-04-08T07:27:03+00:00\",\"dateModified\":\"2026-04-08T07:27:48+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#primaryimage\",\"url\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/SMD-Soldering-for-LMR-SDR-1.1.jpg\",\"contentUrl\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/SMD-Soldering-for-LMR-SDR-1.1.jpg\",\"width\":1200,\"height\":676},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/smd-soldering-for-lmr-sdr-1-1\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"SMD Soldering for LMR SDR 1.1\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#website\",\"url\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/\",\"name\":\"Johnson's Techworld\",\"description\":\"Johnson&#039;s Techworld\",\"publisher\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#\\\/schema\\\/person\\\/6201c843e80ccd3578e6196b1d007027\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/#\\\/schema\\\/person\\\/6201c843e80ccd3578e6196b1d007027\",\"name\":\"Johnson Francis\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/channels4_profile.jpg\",\"url\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/channels4_profile.jpg\",\"contentUrl\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/channels4_profile.jpg\",\"width\":600,\"height\":600,\"caption\":\"Johnson Francis\"},\"logo\":{\"@id\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/channels4_profile.jpg\"},\"description\":\"Amateur Radio Operator VU2JO. Originally licensed as VU2JFP with Grade 1 license in 1985. Upgraded to Advanced Grade in 1988 and was allotted new callsign to VU2JO\",\"sameAs\":[\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\",\"https:\\\/\\\/www.youtube.com\\\/@johnsonstechworld\\\/\"],\"url\":\"https:\\\/\\\/johnsonfrancis.org\\\/techworld\\\/author\\\/jf\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/","og_locale":"en_US","og_type":"article","og_title":"SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld","og_description":"Though I had bought the LMR SDR 1.1 board from VU3ZOF with Si5351 clock generator pre soldered as it was a tiny SMD component, later I found that two voltage regulator ICs in the kit prepared by VU3GEX are also SMD. An advantage was that they had slightly bigger leads than Si5351. So I thought [&hellip;]","og_url":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/","og_site_name":"Johnson&#039;s Techworld","article_published_time":"2026-04-08T07:27:03+00:00","article_modified_time":"2026-04-08T07:27:48+00:00","og_image":[{"width":1200,"height":676,"url":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg","type":"image\/jpeg"}],"author":"Johnson Francis","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Johnson Francis","Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#article","isPartOf":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/"},"author":{"name":"Johnson Francis","@id":"https:\/\/johnsonfrancis.org\/techworld\/#\/schema\/person\/6201c843e80ccd3578e6196b1d007027"},"headline":"SMD Soldering for LMR SDR 1.1","datePublished":"2026-04-08T07:27:03+00:00","dateModified":"2026-04-08T07:27:48+00:00","mainEntityOfPage":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/"},"wordCount":583,"publisher":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/#\/schema\/person\/6201c843e80ccd3578e6196b1d007027"},"image":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#primaryimage"},"thumbnailUrl":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg","articleSection":["Amateur Radio (Ham Radio)"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/","url":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/","name":"SMD Soldering for LMR SDR 1.1 - Johnson&#039;s Techworld","isPartOf":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/#website"},"primaryImageOfPage":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#primaryimage"},"image":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#primaryimage"},"thumbnailUrl":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg","datePublished":"2026-04-08T07:27:03+00:00","dateModified":"2026-04-08T07:27:48+00:00","breadcrumb":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#primaryimage","url":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg","contentUrl":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2026\/04\/SMD-Soldering-for-LMR-SDR-1.1.jpg","width":1200,"height":676},{"@type":"BreadcrumbList","@id":"https:\/\/johnsonfrancis.org\/techworld\/smd-soldering-for-lmr-sdr-1-1\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/johnsonfrancis.org\/techworld\/"},{"@type":"ListItem","position":2,"name":"SMD Soldering for LMR SDR 1.1"}]},{"@type":"WebSite","@id":"https:\/\/johnsonfrancis.org\/techworld\/#website","url":"https:\/\/johnsonfrancis.org\/techworld\/","name":"Johnson's Techworld","description":"Johnson&#039;s Techworld","publisher":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/#\/schema\/person\/6201c843e80ccd3578e6196b1d007027"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/johnsonfrancis.org\/techworld\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Person","Organization"],"@id":"https:\/\/johnsonfrancis.org\/techworld\/#\/schema\/person\/6201c843e80ccd3578e6196b1d007027","name":"Johnson Francis","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2025\/01\/channels4_profile.jpg","url":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2025\/01\/channels4_profile.jpg","contentUrl":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2025\/01\/channels4_profile.jpg","width":600,"height":600,"caption":"Johnson Francis"},"logo":{"@id":"https:\/\/johnsonfrancis.org\/techworld\/wp-content\/uploads\/2025\/01\/channels4_profile.jpg"},"description":"Amateur Radio Operator VU2JO. Originally licensed as VU2JFP with Grade 1 license in 1985. Upgraded to Advanced Grade in 1988 and was allotted new callsign to VU2JO","sameAs":["https:\/\/johnsonfrancis.org\/techworld","https:\/\/www.youtube.com\/@johnsonstechworld\/"],"url":"https:\/\/johnsonfrancis.org\/techworld\/author\/jf\/"}]}},"_links":{"self":[{"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/posts\/16853","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/comments?post=16853"}],"version-history":[{"count":2,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/posts\/16853\/revisions"}],"predecessor-version":[{"id":16861,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/posts\/16853\/revisions\/16861"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/media\/16859"}],"wp:attachment":[{"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/media?parent=16853"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/categories?post=16853"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/johnsonfrancis.org\/techworld\/wp-json\/wp\/v2\/tags?post=16853"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}